top of page

Instructions

Get Slushed Logo

Our professional team is dedicated to providing the best service for your rental needs. We provide detailed instructions on how to use the equipment, including Collection, Setup, Mixing concentrates & return. Our team is always available to answer any questions you may have.

KEY NOTES

  • Machines must travel upright, Please check measurements as we do not recommend using hatchbacks to transport machine

  • Do not add alcolhol until mix is frozen

Machine Collection

After the quote is accepted the equipment be booked for hire. A week prior to hire we will arrange a time a day for collection. The pickup address is 6 Bollard Street, Portsmith. If you are not on schedule please give us a call or text so we know.

We recommend collecting machines in a 4x4 or ute for safety and to avoid damage to you vehicle or the machine.

Large twin - 

Small twin - 

Single -

The machines must be kept upright at all times. The plastic bowls are fragile so care must be taken during transport and handling. 

Machine Setup
 

  • We recommend you choose a sturdy position out of direct sunlight on a strong bench or table to setup the machine.

  • Place black plastic drip trays on the loacting pins at the front of the machine. Place lids on top and connect lighting plug if any.

  • Connect to power after the mix has been added

Mixing Concentrates & Adding Alcohol

The standard concentrate mixture ratio is 1 parts concentrate to 5 parts water. We recommend always checking the instructions on the bottle.

We recommend you make up enough mix to fill the machine and keep the rest in a fridge if possible to top up the machine as it gets emptied.

Operating Machine

Machine Diagram

After mix is added to the machine set switches as shown in Green on the diagram.

If a bowl gets low on mix it may be to forzen to dispense. In this case change bottom switch to stop as shown in Amber on the diagram.

Once all the mix in either bowl has been completely emptied turn that side off as shown in red on the diagram

Once all mix from both sides is emptied unplug the machine

Cleaning & Return

When you are finished with the machine disconnect the power.

Empty any remaining mix either into bottles to drink or pour down drain.

If at possible, at your earliest convience run clean water only through the bowls to give a quick rinse out of mix,

  • NEVER DISASSEMBLE ANY PARTS and never use detergents

​

bottom of page